34
of a port on the network adapter. For example, if a network adapter has four ports, you can
switch to the network adapter by specifying any of the four port numbers.
3.
Enable QinQ.
a.
Execute the
rmmod bnx2x
command to uninstall the driver.
b.
Execute the
nvm vlant
command to enable QinQ.
c.
Execute the
exit
command to exit engineering mode. Restart the server and enter the
BIOS Setup utility to continue configuration.
Figure 83 Enabling QinQ
4.
To configure QinQ in SF mode:
a.
Click the
Advanced
tab, select
network_adapter_port
>
Device Hardware Configuration
Menu
>
QINQ Configuration
, and then press
Enter
.
b.
Set
QINQ VLAN mode
to
QINQ
and configure the port VLAN ID and VLAN priority.
c.
After setting all the ports, press
F4
to save the configuration.
Figure 84 Configuring QinQ in SF mode
5.
To configure QinQ in NPAR mode:
a.
Click the
Advanced
tab, select
network_adapter_port
>
NIC Partitioning Configuration
Menu
>
QINQ Configuration
, and then press
Enter
.
