24
Figure 53 Verifying the new volume
Red Hat systems
1.
Configure FCoE on the FCoE storage device and switching fabric modules and make sure the
FCoE link is unblocked. For how to configure FCoE on a switching fabric module, see the
related command reference and configuration guide.
2.
Execute the
service
fcoe
start
and
service
lldpad
start
commands to enable the
FCoE and LLDP services, respectively.
Figure 54 Enabling the FCoE and LLDP services
3.
Execute the
service
fcoe
status
and
service
lldpad
status
commands to verify
that the FCoE and LLDP services are enabled.
Figure 55 Verifying the state of the FCoE and LLDP services
4.
Execute the
cp cfg-ethX
cfg
-
ethM
command in the
/etc/fcoe
directory to create and copy
a configuration file for the FCoE port. The
cfg
-
ethM
argument represents the port used for
FCoE connection.
