18
Figure 39 Viewing the newly-added network disks
NOTE:
In this example, two volumes have been created on the storage server so that two network
disks are added.
6.
Execute the
mkfs
command to format the newly-added disks.
Figure 40 Formatting a newly-added disk
7.
Execute the
mount
command to mount the disk.
Figure 41 Mounting the disk
Configuring FCoE
The FCoE feature must cooperate with the remote network storage device. The configuration
method for a network storage device varies by device. This document describes only configuration
on the local server.
Configuring FCoE boot
FCoE boot is supported only in UEFI boot mode.
To configure FCoE boot:
1.
Log in to OM.
2.
Click
Policy Management
. In the
Compute Node Network Policy
area, click
Create
.
3.
On the page that opens, specify the slot number and model for the Mezz network adapter and
click the plus sign for the port to be configured.
Select the correct slot number and port number for the Mezz network adapter according to the
mapping relations described in "
Network adapter and ICM interconnection
4.
In the expanded area, select
FCoE
for
PF
Type
, configure FCoE parameters, and click
Save
.
For more information about FCoE parameters, see the OM online help.
