H3C CR19000-8, Руководство по установке, Страница: 111 / 115

12-3
5. Place the fabric module slot filler panel and the foam cushion in the packing box, and seal the
box with tape.
6. Perform the same steps to repack the other fabric module slot filler panels.
Repacking the router chassis
Removing the chassis from the rack
The router is heavy. As a best practice, use a mechanical lift to move the router.
To remove the chassis from the rack:
1. Prepare the pallet, carton, and packing bag of the chassis. Make sure they are clean, dry, and
not damaged.
2. Place the pallet at a location where you can move the chassis easily.
3. Remove the air filter and top hood from the chassis.
4. As shown by callout 1 in Figure12-1 , use a Phillips screwdriver to loosen the screws that attach
the mounting brackets to the rack.
5. As shown by callout 2 in Figure12-1 , use a minimum of four people to slide the chassis out of
the rack along the slide rails. When most part of the chassis is removed from the slide rails, lift
up the chassis by holding the chassis handles to completely remove the chassis from the rack.
6. Place the chassis onto the pallet.
Figure12-1 Removing the router from the rack