background image

20

 

 

It is customer's sole responsibility to back up his/ her data. Before allowing any service from H3 Platfo rm or its service provider, including 

remote login check and repairing service, the customer must back up the data and remove any of the customer's confidential, p roprietary or 

personal information. Neither H3 Platform nor its service provider will be liable for any damage, loss and exposure of confidential or private 

information or data contained in any product, hardware, software or media. 

Notice of Warranty Claims

 

All warranty claims must be made during the applicable warranty period. Any claim made after that time will not be eligible for warranty 

service but may be serviced under a separate H3 Platform support contract covering the product. 

DISCLAIMER OF WARRANTY

 

H3 Platform does not warrant uninterrupted or error-free operation of an H3 Platform product. If the customer transfers an H3 Platform 

product to another user, warranty service is NOT available to that user for the remainder of the warranty period. Consumables , such as 

batteries and 

PCIe power cables

 have no warranty. The above warranties will not apply to products from which serial numbers have been 

removed or to defects resulting from misuse (including operation of a H3 Platform product without covers and incorrect input  voltage), 

unauthorized modification, operation or storage outside the environmental specifications for the product, in-transit damage, improper 

maintenance, or defects resulting from use of third-party software, accessories, media, supplies, consumables, or such items not designed 

for use with the product. The H3 Platform Software Product Limited Warranty does not apply to software used with products not covered by 

any of the H3 Platform limited warranties offered as part of your purchase of an H3 Platform product.  

TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY OR CONDITION, 

WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED AND H3 PLATFORM SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR 

CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE. 

 

Some Countries, states or provinces do not allow limitations on the duration of an implied warranty, so the above limitation or 

exclusion might not apply to you. The warranty gives you specific legal rights and you might also have other rights that vary from 

country to country, state to state or province to province.

 

Limitation of liability and Remedies.

 

In no event will H3 Platform or its affiliates, subcontractors, or suppliers be liable for any of the following:  

1.

 

Damages for loss of data, or software restoration; 

2.

 

Damages relating to Customer's procurement of substitute products or services (i.e., "cost of cover");  

3.

 

Incidental, special, or consequential damages (including lost profits, loss of use, Customer downtime, cost of data recovery/ re-

creation), even if H3 Platform is informed of their possibility; 

4.

 

Third-party claims against Customer for losses or damages. 

Содержание Falcon 4109

























Отзывы: