background image

19

 

 

Software Limited Warranty

 

Except as provided in the applicable software end-user license or program license agreement, including any software products or the 

operating system preinstalled by H3 Platform are provided “as is” and with all faults, and H3 Platform hereby disclaims all o

ther warranties 

and conditions, either express, implied, or statutory, including, but not limited to, warranties of title and non- infringement, any implied 

warranties, duties or conditions of merchantability, of fitness for a particular purpose, and of lack of viruses. Some states /jurisdictions do not 

allow exclusion of implied warranties or limitations on the duration of implied warranties, so the above disclaimer may not apply to you in 

its entirety. To the maximum extent permitted by applicable law, in no event shall H3 Platform or its suppliers be liable for  any special, 

incidental, indirect, or consequential damages whatsoever (including, but not limited to, damages for loss of profits or conf idential or other 

information, for business interruption, for personal injury, for loss of privacy arising out of or in any  way related to the use of or inability to 

use the software product, even if H3 Platform or any supplier has been advised of the possibility of such damages and even if  the remedy 

fails of its essential purpose. H3 Platform is not responsible for any interoperability or compatibility issues. Some states/jurisdictions do not 

allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply  to you. 

 

H3 Platform warrants all pre-installed H3 Platform software will execute its programming instructions when all files are properly installed. H3 

Platform does not warrant that the software will be uninterrupted or error free. In the event H3 Platform software fails to e xecute its 

programming instructions during the warranty period, the customer's remedy will be either (1) replacement of the H3 Platform software or 

(2) a refund upon return of the product and all copies of software as well as installation instructions.  

Compatibility

 

We have tested and verified the compatibility of third-party products and peripherals on the H3 Platform Compatibility List. Please note that 

the tests conducted in H3 Platform labs may not have covered every aspect and that changes to firmware or hardware may affect  device 

compatibility and stability. H3 Platform does not guarantee the compatibility with third-party products and peripherals on the List and 

reserves the right to update the List at any time without prior notice. 

Repair Service

 

Warranty and out of warranty service should be obtained by contacting the system integrator/dealer/retailer/e-retailer or distributor where 

the customer purchased the product. When requesting for service, the proof of purchase and the product serial number must be  provided. 

The return of the defective product should be strictly through the original route of purchase, and the customers shall pack the product 

appropriately to prevent the returned product from suffering in the transportation. 

 

There are no user serviceable parts inside the product. Do not allow any unauthorized service center or personnel to repair or modify the 

product. If the original channel is no longer in business or unavailable, the customer may contact H3 Platform Technical Supp ort for 

international RMA services. In this case, the customer will be charged for handling fee, $50 (USD), and all fees incurred, including two ways 

freight, duties, taxes and brokerage fee. 

 

Содержание Falcon 4109

























Отзывы: