User’s Manual & Warranty
H2O-GSB3C | H2O-GS/FB/3C
Cleaning and User maintenance
WARNING:
Before cleaning unit turn off power and unplug unit.
It is recommended the unit is disassembled and cleaned every 2 months.
If cooler hasn’t been used for more than 3 days, discard water from tank and
fl
ush out unit.
Wash all removable parts thoroughly with warm water and detergent. Rinse well.
Step 1:
Remove bottle. Mix a teaspoon of bi-carb soda with warm water approx. 1L/ 34oz,
pour in cooler until the tank reservoir is full. Leave for 3 hours, overnight preferred.
Step 2:
Pour bi-carb solution out of the tank and
fl
ush with water.
Step3:
The tank can be wiped clean with a soft cloth. To clean the tank, carefully remove the plastic
water divider plate. Be careful when replacing the water divider plate, do not force into place.
Note:
The water divider plate is used to separate the chilled and room temperature water. If this
plate is removed the unit will not function at its optimum.
Step 4:
Ensure
fi
lter cartridge is replaced every 2 months or after dispensing 150L/ 40 Gallons of
water. See Filter replacement below.
FILTER REPLACEMENT FOR H2O-GS/FB/3C
It is recommended that you replace the
fi
lter cartridge every 2 months or after dispensing
approximately 150L / 40 Gallons of water.
Replace with H2O Filters- Model H2O-FC/GS/FB/3C
1. Soak new
fi
lter in cold water for 20 minutes.
Before soaking, hold cartridge under water and shake vigorously for 20 seconds.
2. Insert
fi
lter into unpuri
fi
ed water tank of
fi
lter bottle.
3. Discard
fi
rst 4 glasses of
fi
ltered water.
Record the month you replace the
fi
lter cartridge on the
fi
lter change dial.
To
fi
nd out where you can purchase the replacement component H2O-GSB3C,
please email [email protected]
Содержание H2O-3C
Страница 1: ......
