Installation Instructions for Merchandiser Graphic on Dispenser with Icemaker Adaptor
©2012, IMI Cornelius Inc.
www.cornelius.com
Publication Number: 620909201PNB
!
WARNING:
Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all power is off to the unit before performing
any work.
Failure to comply could result in serious injury, death or damage to the equipment.
ED250 Model:
1. Remove ice maker lid from the top of the dispenser. 2. Lift up on the merchandiser and disengage the
hooks from the sheet metal cabinet.
3. Place the merchandiser face down on a counter.
Loosen the three screws holding the retainer tabs.
4. Bend the top lip of the merchandiser back slightly to
release the diffuser and graphic.
5. Replace the graphic in the diffuser.
6. Insert the diffuser with the graphic by bending the
top lip of the merchandiser to engage the retainer.
Position retainers and tighten the three screws.
Release Date: 10/15/2012
Revision: A
