WINTER TIMBERMAX 4 – 23 ECO
27
8.10
Universal spindle adjustment
Universal spindle can be adjusted by rotary angles, forward and backward, elevation and
selection of positive or negative. It can be used as a left vertical spindle, right vertical spindle,
top horizontal spindle or bottom horizontal spindle by adjusting the different position of
forward and backward of level sliding board, elevation of upright sliding board and rotating
angle of 360 degrees of spindle. The universal spindle can process every last part of the
workpieces. The preparative works needs before adjusting. please see
（
Figure21
）
①
Loosen bolt 1 and locking bar 4, move fence 2 and side pressure board 3 until the spindle
passes throught smoothly.
②
Uninstall cutter, adjust the protected cover.
（
Figure21
）
8.10.1
Rotate angle adjustment of universal spindle
The rotary angle adjustment of universal spindle please see
（
Figure22
）
：
Loosen lockbolt 1 and bar 2, rotate adjusting bar 5 to the angle in need according to the
symbol and required angles of adjusting bar 5. Then screw the lockbolt 1 and bar 2.
（
Figure22
）