WINTER TIMBERMAX 4 – 23 ECO
21
8.5
Infeed table and feeding fence adjustment
8.5.1
Adjustment of infeed table
The up/down adjustment of infeed table (namely adjust the cutting quantity of 1st bottom
spindle) please see
（
Figure12
）
，
steps of adjustment: Loosen the two locknuts 5 of machine tool
profile, unscrew adjusting bar 2, pull or push according to the graduated scale under adjusting
bar to adjust the height of infeed table 4 in need. The adjustable range is 0-10mm, screw
adjusting bar 2 after finished, then lock lokcnut 5.
（
Figure12
）
8.5.2
Adjustment of feeding fence
The forward/backward adjustment of feeding fence (namely adjust the cutting quantity of
right vertical milling cutter) please see (Figure 16), steps of adjustment: Unscrew adjusting bar
1, pull or push according to the graduated scale under adjusting bar to adjust the position of
feeding fence 3 in need (forward or backward). The adjustable range is 0-10mm, screw
adjusting bar 1 after finished.