WINTER TIMBERMAX 4 – 23 ECO
26
8.9
Top spindle adjustment
8.9.1
Radial adjustment of top spindle
see
（
Figure19
）
：
①
Choose a standard test piece 2, measured the height H of test piece.
②
Put test piece 2 between guiding board 3 and cutter 1.
③
Adjust knob 4 on the control panel, radial adjust the spindle and let cutter blade clings to
test piece 2.
④
Set the value of digital indicator into H. (Digital indicator please see No.2 in figure 27)
（
Figure19
）
8.9.2
Axial adjustment of top spindle
The axial adjustment of top spindle please see
（
Figure20
）：
①
Let a spindle ring 2 of 10mm thickness circle the spindle, and put cutter adjusting ruler 1
onto the guiding board 3.
②
Loosen axial locking bar 4, rotate axial adjusting bar 5, axial adjusting the spindle until the
top of spindle ring 2 touches the cutter adjusting ruler 1.
③
Screw axial locking bar 4.
④
Set the value of digital indicator into 10mm.
（
Figure20
）
