WINTER TIMBERMAX 4 – 23 ECO
24
8.7
Right spindle adjustment
8.7.1
Radial adjustment of right spindle
See
（
Figure15
）
:
①
Install measured cutter block 1 (E.G. radius of 62.5mm)
②
Press cutter adjusting ruler 2 firmly against to the guiding board 3.
③
Rotate radial adjusting bar 4, radial adjust the cutter, turn the cutter manually reverse cutting
direction (namely the way as showed in the figure), let the edge touches the cutter adjusting
ruler 2.
④
Set the value of digital indicator. For example, set the value into 62.5mm when the radius of
cutter block is 62.5mm.
（
Figure15
）
8.7.2
Axial adjustment of right spindle
The Axial adjustment of right spindle please see
（
Figure16
）
：
①
Put a spindle ring 1 of 10mm thickness onto the spindle.
②
Put cutter adjusting ruler 3 onto the board 2.
③
Loosen locking bar 5 then axial locking bar 6, rotate axial adjusting bar 4, axial adjusting
the spindle until the top of spindle ring 1 touches the cutter adjusting ruler 3.
④
Screw axial locking bar 4, lock locking bar 5.
⑤
Set the value of digital indicator into 10mm.
（
Figure16
）
