H-Germany HEYNER MaxiProtect AERO, Инструкция по эксплуатации

Страница: 8 / 38

17
18
Make sure that all parts of the child car seat are securely stored away, so that they don’t go
missing during daily use or will be jammed between doors or adjustable seats!
The children‘s car seat should always be secured in the car, even when not in use by your child.
As long as the child car seat is not in use, protect it against intensive and direct sunlight. It can
become very hot if exposed to direct sunlight. Especially, the belt buckle heats up quickly.
After an accident it is required to replace the whole child restraint system or to send it to the
manufacturer for inspection - together with the accident report.
The child car seat should never be used without the originalcover.
Should the seat cover need to be replaced, only use original HEYNER MOBIL AUTOMOTIVE GMBH
seat covers.
In case of diffi culties, please contact your dealer or the manufacturer.
Use the vehicle type list of your manufacturer to check which vehicle seats are suitable for child
car seats.
Never secure your child or the child car seat with a 2-pointvehicle-belt. If your child is secured in
the child car seat with a 2-pointvehicle-belt only, it can be seriously injured in an accident.
2. Connecting the backrest to the booster seat
The seat consists of a seat shell and a backrest with headrest. Only the
combination of the two parts off ers maximum protection.
WARNING: The components of the HEYNER® MaxiProtect AERO must not
be used separately or in combination with parts or headrests of other ma-
nufacturers or series. In this case the approval expires immediately.
Place the backrest fl at behind the seat shell. Then insert the two con-
necting hooks (A) on the lower part of the backrest from above into the
openings (B) provided on the rear part of the seat shell. Now carefully
straighten the backrest (90-degree angle) and let the two connecting
hooks engage fi rmly.
The backrest must lie fi rmly against the seat shell in the upright position
and must not tilt backwards after installation.
WARNING: Always make sure that the individual parts are fi rmly mounted.
Individual parts must never be jammed, e.g. by the vehicle door.