184617
21
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
DUKE Soft Serve Freezer Model 927CMT
a. the mix containers, pickup tube as-
semblies, hoses, and probes.
b. the head spigot openings, O-ring
grooves, dispense nozzle mounting
rings, and mix ports, as shown in
figure 6-5.
c. the shaft cup seals, washers and O-
rings; spigot O-ring grooves; and
nozzles, as shown in figure 6-6.
d. the beater shafts and the scraper
blade pin holes, as shown in figure 6-
7.
Important:
Do not leave parts in sanitizer for
longer than 15 minutes.
3.
After all parts are washed, rinse and
then place them in the sanitizing
solution. For proper sanitizing, the
parts must remain fully immersed in
the sanitizing solution for 5 minutes.
Allow the parts to air-dry after sanitiz-
ing.
4.
Using a warm dish detergent solution
thoroughly brush; the mix feed tubes
from the refrigerated cabinet to the
cylinders as shown in figure 6-8, the
inside of the cylinders including the
back wall, and the inside of the drain
tube, as shown in figure 6-9.
5.
Remove the drip tray and insert. Wash
in a warm dish detergent solution and
rinse with clear water.
6.
Wash the outside of the freezer and
inside of the cabinet with a warm dish
detergent solution. Rinse with clear
water.
Replace worn brushes. Use only
original or authorized replacement
parts. See Accessories Parts List in
Replacement Parts Section of this
manual to order new brushes.
6.3 Cleaning Instructions
— continued
Figure 6-7 Scraper Blade Pin Holes
Figure 6-9 Drain Tube
Figure 6-8
Brush inside of cylinder mix
feed tubes.