H.C Duke & Son Arby's Electro Freeze Compact Series, Руководство оператора со списком запасных частей

Страница: 51 / 71

ELECTRO FREEZE Shake Model CS704
185260 41
13 Troubleshooting Charts
— continued
PROBLEM PROBABLE CAUSE REMEDY
Product dispenses slowly out of
dispensing head.
1. No product in hopper. 1. Fill hopper.
2. Product too cold. 2. See “Dispensed product too
hard.”
3. Mix feed tube not open. 3. Check mix feed tube setting.
Dispensed product too hard.
1. Torque control erratic or set
too firm
1. Contact your Electro Freeze
Distributor for service.
2. Low suction pressure, refrig-
eration system.
2. Contact your Electro Freeze
Distributor for service.
3. Mix feed tube not open. 3. Check mix feed tube setting.
Freezer runs continually and
product continues to get colder.
1. Plunger not fully closed. 1. Close plunger completely.
2. Starter or relay contact
points stuck.
2. Contact your Electro Freeze
Distributor for service.
3. Torque control not set
properly or faulty.
3. Contact your Electro Freeze
Distributor for service.
4. Suction pressure too low. 4. Contact your Electro Freeze
Distributor for service.
Compressor motor does not
operate when dispensing.
1. Plunger switch defective or
out of adjustment.
1. Contact your Electro Freeze
Distributor for service.
2. Time delay defective. 2. Contact your Electro Freeze
Distributor for service.
3. Defective torque control. 3. Contact your Electro Freeze
Distributor for service.
Compressor motor does not
operate when dispensing.
1. Plunger switch defective or
out of adjustment.
1. Contact your Electro Freeze
Distributor for service.
2. Time delay defective. 2. Contact your Electro Freeze
Distributor for service.