HUMAN-MACHINE INTERFACE (HMI)
Sleep Mode /
Sleep Exit
Up current
button
Pre-gas
button
Downslope
Welding
current
Display
Cold current
button
A/V display
selection
Creating /
Recalling /
Deleting JOBS
TIG AC
AC
Post gas
button
AC / DC
Sub-processes
Pulse
Frequency Button
Trigger
mode
Processes
Functions
Pictograms
MMA
TIG DC
TIG AC
Comments
Sleep Mode / Sleep Exit
•
•
•
Button to put the product into and out of sleep mode.
Sub-processes
•
•
In MMA process: access to "Pulse MMA"mode,
In TIG DC: access the "Pulse" or "Spot " modes.
AC/DC
•
•
Choose between TIG "DC", TIG "AC" and TIG "AC - Easy".
AC
•
Select the parameter to be adjusted between "Frequency"
and "Balance".
A/V display selection
•
•
By default the welding current is displayed on the HMI.
Pushing this button displays the welding voltage during or
after the welding cycle.
JOB
•
•
•
Allows you to recall, create and delete a job. Refer to the
JOB section for more information.
Pre-gas
•
•
Setting the Pre-Gas time. This time corresponds to the time
it takes to purge the torch and to protect the area with gas
before ignition
Up slope current
•
•
•
Current rise ramp.
Pulse Frequency
•
Pulse frequency setting (only in TIG DC).
21
EN
Translation of the original instructions
PROTIG 201 AC/DC - 201L AC/DC
