18
POWERDUCTION 50LG
EN
Translation of the original instructions
Warning ! Very hot surface. Risk of burns.
• The parts and pieces that have just been heated are hot and may
cause burns when manipulated.
• Do not touch any hot parts with your hands.
• Wait for the parts and pieces to cool down before handling them.
• Check that jewellery (such as wedding rings) or other metal
pieces do not get close to the induction heating machine or the
inductor when switched on.
• Remove any jewellery or any metal object from yourself before
using this machine
• People with metal implants should not use this machine.
• In case of burns, rinse with water abundantly and see a medical
doctor as soon as possible.
Dangerosity of the gas fumes
• Keep the head away from the fumes, do not inhale.
• If working inside, ventilate the area or use a fume extractor to
evacuate the gases and fumes.
• Induction heating of certain materials such as adhesives and flux
can generate fumes and gases. Breathing these fumes and gases
can be dangerous for your health. For example, heating urethane
generates a gas : hydrogen cyanide, potentially mortal for hu-
mans.
• If the ventilation is insufficent, use an approved respiratory unit.
• Read the safety data sheets (MSDS) and the manufacturer’s ins-
tructions for adhesvies, flux, metals, consumables, coatings, clea-
ning agents, corrosives, and paint strippers.
• Do not use the heater on parts being degreased or sprayed. The
heat might react with fumes and generate highly toxic gases.
• Work in a confined area only if it’s well ventilated, or use an ap-
proved repiratory/filtration unit. Make sure that a qualified per-
son is around to watch over you. The fumes and gases released
while heating can replace oxygen or air, causing accidents or
death. Check the quality of the air you’re breathing
• Do not overheat metals, such as galvanised steel, covered with
lead or cadmium, unless the coating is removed from the surface
before it’s heated, that the area is well ventilated, and if needed,
use an approved filtration/respiratory unit.. Foundry pieces and
all metals containing such elements may generates toxic fumes if
overheated.
• Check the MSDS for temperature related details.
