GYS EASYMIG 110, Руководство пользователя

Страница: 17 / 88

17
EASYMIG 110-130-140-150
EN
SYMPTOMS POSSIBLE CAUSES REMEDIES
The welding bead is porous
The gas flow rate is not sufficient.
Adjust flow range 15 to 20 L / min.
Clean the working metal.
Gas bottle empty. Replace it.
Gas quality unsatisfactory. Replace it.
Air flow or wind influence. Prevent drafts, protect welding area.
Gas nozzle dirty. Clean or replace the gas nozzle.
Poor quality wire. Use suitable WIRE for MIG-MAG welding.
Surface to weld in bad condtion. (rust, etc…) Clean the metal before welding.
Very important flashing particules.
Arc voltage too low or too high. See welding settings.
Bad earth connection. Adjust the earth cable for a better connection.
Insufficient gas flow. Adjust the gas flow.
No gas flow at the end of the
torch.
Bad gas connection.
Check the gas connection at the welding machine.
Check the gas regulator and the solenoid valves.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported.