PSW Series User Manual
62
Parallel / Series Operation
This section describes the basic operations required to operate the
power supply in series or parallel. Operating the PSW series in
parallel increases the total power output of the power supply units.
When used in series, the total output voltage of the power supplies
can be increased.
The number of the power supplies that can be connected in series
or parallel depends on the model and the mode:
Series Mode: 2 units maximum
Parallel Mode: 3 units maximum
To use the power supplies in series or parallel, units must be used
in a Master-Slave configuration. In the master-slave configuration a
“master” power supply controls any other connected “slave”
power supplies.
Master-Slave Parallel overview
→ from page
63
Parallel connection
→ from page
65
Parallel operation
→ from page
68
Master-Slave Series overview
→ page
70
Series connection
→ page
72
Series operation
→ from page
74
Before operating the power supply, please see the Getting Started
chapter, page 9.
