1. Important Safety Instructions
2. Introduction
3. Inverter Materials List
4. Inverter Features
5. Inverter Installation
6. Inverter Location
7. Cables for DC Input and Ground
8. Fuses (or circuit breakers)
9. Install the Inverter
10. Inverter Operation
11. Operating Several Loads at once.
12. Inverter Loads
13. Routine Maintenance
14. Recharging Batteries
15. Battery’s Capacity Calculation
16. Troubleshooting
17. Specifications
18. Disposal Instructions
19. Warranty and Service Agreements
IMPORTANT Read and save this owner's guide for future reference.
This chapter contains important safety and installation instructions for our inverter. Each
time, before using the power inverter, read all instructions and cautionary marking on or
provided with inverter and all appropriate sections of this guide
1.IMPORTANT SAFETY INSTRUCTIONS
Do not expose the inverter to rain, snow, spray, or bilge water. This inverter is designed for indoor use only.
Do not operate the inverter if it has received a sharp blow, been dropped, has cracks.
Do not disassemble the inverter. Internal capacitors remain charged after all power is disconnected.
Disconnect both AC and DC power from the inverter before attempting any maintenance or cleaning or working
on any circuits connected to the inverter. See note below.
Do not operate the inverter with damaged or substandard wiring.
Make sure that all wiring is in good condition and is not undersized.
ELECTRICAL SHOCK HAZARD
FIRE AND BURN HAZARD
EXPLOSION HAZARD
Failure to follow these instructions will result in death or serious injury.
Do not cover or obstruct the air intake vent openings and /or install in a zero-clearance compartment.
Do not use transformer less battery chargers in conjunction with the inverter due to overheating.
Failure to follow these instructions will result in death or serious injury.
Charge only properly rated (such as 24V) lead-acid (GEL, AGM, Flooded, or lead-calcium) rechargeable batteries
because other battery types may explode and burst.
Do not work in the vicinity of lead-acid batteries. Batteries generate explosive gases during normal operation.
Do not install and /or operate in compartments containing flammable materials or in locations that require
ignition-protected equipment.
Failure to follow these instructions will result in death or serious injury.
Notes:
1. Follow these instructions and those published by the battery manufacturer and the manufacturer of any
equipment you intend to use in the vicinity of the battery. Review cautionary markings on these products and on the
engine.
2. The inverter contains components which tend to produce arcs or sparks.
3. Locations include any space containing gasoline-powered machinery, fuel tanks, as well as joints, fittings, or other
connections between components of the fuel system.
1-2
2
3
3-4
4-5
5-6
6
6
7-9
9-10
10
11
11
12
12
12-13
14
14-15
15
Содержание 2221315
Страница 1: ...2221315 Inverter ...
