GVM-VAC GVM6600-CM, Руководство пользователя

Страница: 28 / 131

28
GVM-VAC
www.gvm-vac.com
Pre-Operating Section
2.6 Work Site Preparation
1.
2.
3.
4.
5.
6.
7.
An inspection of the leaves to be vacuumed must be done prior
to the vacuuming process. We realize that it is impossible to
completely inspect every inch of leaves being vacuumed, but it
is imperative that all leaves be inspected for obvious dangerous
material before vacuuming.
The operator should never be in the line of traffic, the operator
should work on the shoulder whenever possible.
The operators should place cones or other barriers to provide
adequate warnings to vehicles and pedestrians that vacuuming is
in progress.
Strobe lights on the leaf vacuum and on the tow vehicle should be
on at all times for high visibility.
Confirm that all operators are wearing proper clothes and person -
al protective equipment.
Restrict all personnel, except the operator from the area near the
leaf vacuum. DO NOT allow pedestrians, children or animals
near the work area.
Make sure that the exhaust hose fits properly into the box con -
tainer so that all debris is blown into the box container.
The following guidelines must be followed to insure safety.
Never place any part of the body under or behind guards or any
other visually obscured area.
Making sure the leaves are clear of possible dangerous material is
critical to safe vacuuming. Vacuuming up metal, glass, rocks or
other dangerous material CAN cause serious damage to the equip-
ment or personal injury.