GVM-VAC GVM6600-CM, Руководство пользователя

Страница: 43 / 131

43
GVM-VAC
www.gvm-vac.com
Maintenance Section
4.3 Lubrication, continued;
Lubrication Points, continued;
Figure 4.3e
Never go under the dump body unless the body is
empty and the body prop(s) is in the proper posi-
tion.
The body prop is designed and intended to sup-
port an EMPTY truck body in the raised position.
Unload the body before using the body prop(s).
Figure 4.3f
Figure 4.3f
support the dump body as detailed in section 3.2.
Lubricate the fittings at least every 200 hours of op -
eration with a #2 high grade grease. There are tre-
mendous forces on the bearing surfaces within the
hoist frame. It pays to be generous with the grease
gun, to insure proper operation and long life.
7. Hoist Hinge and Body Prop(s) Fittings (fig -
ure 4.3f): Each hinge pivot has a grease fitting
that needs lubricating every 200 hours. The body
prop(s) has a fitting at the pivot area as shown in
figure 4.3h.
8. Latch Shaft Pillow Block Bearings (figure 4.3g):