GVA GVA18LEDC, Инструкция по эксплуатации

Страница: 24 / 40

24
3) HDMI CEC (Consumer Electronics Control) allows your TV to share control of some
functions with various compatible equipment via an HDMI cable connection. The
HDMI cable connecting your equipment to this TV must support both ARC and CEC
functionality.
For example, with HDMI CEC set to “On” in the TV’s menu and also on an HDMI
connected device that supports CEC (eg. a Blu-ray player), selecting the HDMI input on
this TV sends a signal to the Blu-ray player and may switch it On from its Standby state
(depending on the player’s CEC capabilities).
If the HDMI CEC and Auto Standby in the HDMI CEC menu are both set to “On” in the
TV’s Option menu, and the connected equipment supports the Standby function, then
switching On the HDMI connected player may also switch On the TV from its Standby
state. This activity may even set the TV to the HDMI input that the external device is
connected to (again, these examples depend on the capabilities of your connected
equipment).
The HDMI CEC system supports a wide variety of commands, many of which may not
be applicable to this TV or any connected HDMI equipment. Refer to the User Manual
of your other equipment to check what areas of the CEC commands they may be
able to work with. If after selecting CEC operation you find the TV or any connected
equipment performing unusually (eg. switching itself back on after you’re switched it
back to the Standby mode), your connected equipment may not be compatible with
this TV, and the HDMI CEC sub-menu should be set to the Off position.
PVR File System
In the PVR File System sub-menu you will be asked to format your USB 2.0 flash
drive or Hard Disc for PVR Operation. If you are not familiar with the various drive
or partition options for storage devices, start this process using a blank (ie. unused
storage device), or one which does not hold sensitive or required data.
Select Disc
To view and select the USB drive or Hard Disc that you would like to record to, press
the OK button to enter the Select Disk sub-menu and then press or buttons on
your remote control to select the particular storage device type that is connected to the
TV. Press the OK button to return to the PVR File System submenu.
OPERATING THE MENUS