13
Operation Instructions
Before first use
Before washing your clothes for the first time, run a full wash program first:
1. Connect the machine to the mains power supply and the water supply.
2. Put a small amount of detergent in the detergent drawer. Close the drawer.
3. Press the POWER button.
4. Select a wash program.
5. Press the START / PAUSE button.
NOTE: Water is poured into the washing machine to perform an inspection at the time
of shipment from the factory, so there may be drops of water or condensation in the
washing machine. This is not an indication of a malfunction.
Standard washing
1. Pull the door handle and put the laundry in the drum. Make sure no washing gets
caught in the door. Close the door.
2. Press the POWER button and turn the PROGRAM SELECTION DIAL to select your
wash program according to the type of fabric.
3. Select the temperature according to the dirtiness and care label of clothes. Higher
temperature for dirtier laundry.
4. Select the spin speed. The higher the speed, the drier the laundry. Take care of delicate
laundry as higher spin speed will cause delicate laundry to wrinkle.
5. Add detergent into the detergent drawer. The quantity of detergent will depend on the
amount of laundry, the degree of soiling and the water hardness. Use the amount of
detergent suggested on the packaging.
6. Press the START / PAUSE button to start the washing. If you need to change a setting
after the wash has started, turn the power off then on again. Re-select the program,
spin speed and optional functions, and then press the START / PAUSE button.
7. The washing machine will sound when the program is complete.
NOTE:
• During initial start-up and use of the unit, there may be a slight smell while the motor
is settling in. This is not a fault; this is normal operation.
• If the door is locked and you switched the washing machine off and then on - or if
there’s a power cut - it will stay locked for 1 minute.
