15
Operation Instructions
NOTE:
(1)
For reference only; the actual program time may vary, depending on the different
parameters such as the water temperature selected and the weight of load.
(2)
Cotton Intensive with 60°C water temperature and spin speed 1200 rpm selected
is the recommended for 5.0 kg normally soiled cotton load, which is the energy and
water rating label program tested to AS/NZS 2040.1 requirements.
(3)
This specific program time is the average value measured in energy efficiency
testing; actual time may vary.
(4)
Cold (cold water) can be selected by pressing the TEMP button continuously until all
indicators of Temp (20, 40, 60, and 90) are off.
AS/NZS 2040.1 additional testing parameters:
Voltage
230 V~
Water Supply
Cold water (Pressure: 320 kPa)
Detergent
Drum type
Dry detergent dissolved in 1 L of warm water.
Anti-sudsing Agent
Silicon based, 10 g
Drain Height
900 mm
Muting and turning on the sound
The machine will beep when buttons are pressed.
• To mute the sound, press the TEMP button for 3 seconds after starting the wash
program.
• To turn on the sound, press the TEMP button again for 3 seconds.
NOTE: The setting will be kept until the next reset.
