24
Pans do not become
hot and appears in the
display.
The induction hob cannot
detect the pan because it
is not suitable for induction
cooking.
The induction hob cannot
detect the pan because it
is too small for the cooking
zone or not properly
centred on it.
Use cookware suitable for induction
cooking. See section ‘Choosing the
right cookware’.
Centre the pan and make sure that
its base matches the size of the
cooking zone.
The induction hob or
a cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating with
one or two digits in the
cooking timer display).
Technical fault.
Please note down the error letters
and numbers, switch the power to
the induction hob off at the wall, and
contact a qualified technician.
Failure Display and Inspection
If an abnormality comes up, the induction hob will enter the protective state automatically and
display corresponding protective codes:
Problem Possible causes
What to do
F3/F4
Temperature sensor of the induction
coil failure
Please contact the supplier.
F9/FA
Temperature sensor of the IGBT
failure.
Please contact the supplier.
E1/E2
Abnormal supply voltage
Please inspect whether power supply is
normal.
Power on after the power supply is
normal.
E3
High temperature of the induction coil
temperature sensor
Please contact the supplier.
E5
High temperature of the IGBT temperature
sensor
Please restart after the hob cools down.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the
induction hob.