WITE32 Release Notes Version 3.11
The
Errors at The
Test End
check
box
If the check box is checked, no error messages during the
production test will be shown. The buffered messages will be
shown in a separate dialog box at the end of the production test.
Moreover, the buffered messages will be appended to a log file.
The
Error Log File
Name
text box
The text box shows the log file name with a path.
The file open
button
“…”
When the button is clicked, a File Open dialog box is shown. You
can specify the path and file name for the log file.
3. If
the
Errors at The Test End
check box is enabled in the
Configure | Test Options…
dialog box, the full
information on every error is included to the detailed error output, which is shown in the
More Info
mode of the
standard WITE32 error message box (see Figure 16 above). In previous versions of WITE32, only the basic error
information is shown in the
More Info
mode when the
Errors at The Test End
option is enabled.
2.8
Head Selection in the WITE32 Engineering Dashboard
The behavior of the
Head
selection frame of the WITE engineering dashboard is changed. If you change the
maximum number of heads in the
Head No
field of the
Maximum Limit
frame of the
Configure | Device
dialog box,
then:
1. All heads selected in the
Head Selection
table of the
Configure | System
dialog box, with numbers more than
the maximum head number, are deselected.
2. If all heads become deselected as a result of changing the value of the maximum number of heads, then the
Head 0 is selected.
3. If the number of the current head in
Head
frame of the WITE32 Engineering Dashboard is more than the
new value of the maximum number of heads, a head from the list of selected heads with a maximum number
is set as the current head.
Guzik Technical Enterprises
21
