Guyson Euroblast PF, Инструкция по эксплуатации и обслуживанию

Страница: 44 / 84

Operation &
Maintenance
Manual
Issue: 09 A6ML0165 - Euroblast PF Manual
Date: 05/2019 Page: 44
7.1.9.8 Autopulse, C400 and C600
Filter cleaning must be carried out on a regular basis. Initially this should be carried out every four
hours. This can be done by setting the DLUX pulse timer correctly. The pulse timer has two settings,
the first being how long you want the machine to be pulsed for (discharge time), the other being the
frequency in which you want the machine to be pulsed (interval time). The ON and OFF time on the
DLUX timer can be programmed anywhere between 10 milliseconds and 99 hours.
To set these, follow the below instructions:
ON = Discharge Time
OFF = Interval Time
To change the ON time (discharge
time), simply press the right
‘on/arrow up’ button and ‘on’ will
appear briefly on the display. You
can now press the ‘off/arrow down’
button to decrease the time or the
right ‘on/arrow up’ button to
increase the time. Once the
desired ON time is set, simply
don’t press any buttons and the
display will flash, indicating that the
new time is being saved. Once
saved, the unit will operate with the
new time setting.
To change the OFF time press
the left ‘off/arrow down’ button
and ‘off’ will appear briefly on the
display. You can now press the
left ‘off/down arrow’ for
decreasing the time or the right
‘on/arrow up’ for increasing the
time. Once the desired OFF time
is set, simply don’t press any
buttons and the display will flash,
indicating that the new time is
being saved. Once the new time
is saved, the unit will start
operating with the new settings.
The TEST button allows you to
check the valve function.