background image

- 12 – 

Warning:  Never attempt to plug in a battery charger of any kind.  Fire or explosion of 
batteries could result.  Never use rechargeable batteries of any kind in a GunVault 
safe.  Their power characteristics are not compatible with the safe. 

 

 
The AC/DC power supply specified is NOT a battery charger; it is an external power 
supply to be used only when batteries are installed.  
  

11. Maintenance  

Low Battery Warning Indicator 

 
The Low Battery Warning Indicator on the Standard Models is seven red flashes and 
seven soft beeps when the valid access code is entered. For Deluxe models the Low 
Battery Indicator is an audio alert which sounds once per hour in the form of two loud 
beeps. 
 

Battery Replacement 

  

Warning:  Replace the batteries once a year regardless of whether or not the low 
battery indication is observed. 

 

Always check carefully to be sure that all of your batteries are facing in the correct 
direction (i.e. positive (+) end to positive symbol, negative (-) end to negative symbol).  
One battery facing the wrong way will lower the power output of your battery tray, 
potentially causing unreliable operation.  
After replacing the batteries, or when power has been disconnected for more than a few 
seconds, the unit will revert to the factory-default code (one, two, three, four) and you 
must re-program your personal access code(s).  
 

Lubrication  

 
It’s a good idea to lightly coat the door hinge spring and door latch-loop with quality oil 
at least once a year.  Never spray anything into the latch mechanism.  
 

Removable Shelf (MultiVault only)  

 
The MultiVault (large model) has a removable shelf, which can be easily pulled out to 
allow for storage of larger items.  If the shelf is removed, it should be stored carefully to 
avoid damage or loss.  To reinstall, simply slide the shelf back into the shelf guide slots.  
The beveled edge faces front.  
  

 
 
 
 
 

Содержание GV1000C-DLX

















Отзывы: