8
The producer is not responsible for incidental damage or damage due to use of the lifting
tools as well as from violation of this manual.
11b
Procedure Safety Inspection
All inspections and repairings must be written down in the maintenance diagram. This counts
not only for your own inspections but also for inspections which are carried out by your
authorised Gunnebo Lifting distributor. When the clamp is handed in for maintenance and
inspection you always must provide the maintenance diagram.
Defective Lifting Clamps
When a form of wear or damage is indicated, you must take the following measures.
1. Take the lifting clamp out of use. (Note the date of failure of the lifting clamp)
2. Try to recover the cause of the failure, for example (complete list is available in chapter 1):
-
Overload
- Wrong and/or carelessly use
-
etc
These claims stated in no.2 do not fall under the guarantee! To guarantee the security of
you and your colleagues you are obliged to follow up this procedure.
3. Return your lifting clamp (with the maintenance history) to your authorised Gunnebo Lifting
distributor.
4. If the lifting clamp has been revised / repaired by your distributor, you can safely use your
clamp again. Please note this date in your maintenance chart (see page 35).
11c
Inspection Schedule
Months
4
8
12
16
20
24
28
32
36
40
44
48
52
56
60
Years
1
2
3
4
5
Safety inspections by your
own inspector
Maintenance by a offi cial
Gunnebo Lifting distributor
Revision by a offi cial
Gunnebo Lifting distributor
