Gulf Coast Spas DX 5000, Руководство пользователя

Страница: 30 / 52

28
T r o u b l e s h o o t i n g
Gulf Coast Spa Manufacturers offers a quality of spa that is second
to none. If a problem arises, you can check this list for a quick
solution. If this does not resolve your problem, please call our 24/7
technical support hotline at (727) 471-1060. Detailed online
troubleshooting is also available at
www.GulfCoastSpas.com . You
will need your serial number to access this site.
PROBLEM CAUSE SOLUTION
Breaker trips Wiring error Spa Neutral wire not connected to
GFCI (connected to Neutral bus)
Wrong GFCI GFCI breaker is wrong size
Foamy
Water Soaps, Skin
oils, or
undissolved
sanitizer
particles Close the air control valves and
allow filtration cycle to run
Add defoamer
Drain and clean spa
Clean or change filters
Rinse all bathing suits before bathing
Leak Loose
connection Check and hand-tighten unions at
heater & pumps, or clamps on jets
Drain open Close drain valve or replace cap
Light doesn’t
B
urnt out Replace bulb
work Loose wire Check wiring harness to Light
Loose plug Reseat L1 plug on spa pack
Low/no jet Air lock Bleed air from the system (page 27)
pressure Dirty filter Check and clean or replace filter
Closed Jets Open all jets by turning CCW
Closed
valves Open all T-handle shutoff valves on
heater and pumps
ACV open Close air control valves
Low water Fill spa 1” above all jets
Moved my
spa and Wiring error
at GFCI Check Neutral wiring of GFCI (see
diagrams on pages 9-11)
now it
doesn’t
work No power to
spa Reset circuit breakers on GFCI panel
and main circuit breaker panel
Nothing
works Breaker has
tripped Check and reset breaker. If problem
persists, check for loose electrical
connections. Check for Neutral
wiring error at GFCI.
Fuse blown Check for blown Fuse 4 (F4) inside of
spa pack.