Multi
Tub
Arctic
User’s
Guide
WARNING!
Read the technical instructions before installing the bath
Read the users instructions before using the bath
Do not bring sharp objects into the bath
Contact the seller if the colours appear to be changing under or on top of the coating
If a leakage appears contact the seller immediately.
All electrical work should be performed by a qualified electrician
Do not leave children in the bath without supervision
Do not sit with your back or head against the skimmer
For the MultiTub Arctic, a mains connection of 230V, 1x16A, 2x16A with Ground Fault Current Interrupt (GCFI) is required. A
service switch, which is closely installed to the electrical connection, is recommended.
ATTENTION! If the hot tub will be integrated e.g. into a terrace it is necessary that the access is not obstructed in any way
order to be able to service it. Service hatch and outer panel should be removable without difficulties.
If automatic dispensers (floating, etc.) are used, careful adjustment should be made to avoid incorrect dosage. Follow the
recommendations in our instructions.
The circulation pump also generates heat and if it is running a long time (e.g., continuous filtration TM) it can raise the
temperature by several degrees in one day since the tub is well insulated.
Check the quality of the water, as well as temperature and function, regularly, don't leave the spa unmonitored for long time
periods.
