© Guldmann DK-1
1/2018 • # 557617_4.00
© Guldmann DK-1
1/2018 • # 557617_4.00
6
GB . . . POSITIONING LOCK
Vers. 4.00
Item nos:
Positioning Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 557600
Positioning Lock - Single . . . . . . . . . . . . . . . . . . . . . . . . . . 557650
1 .00 Use of Positioning Lock
1 .01 Manufacturer
V. Guldmann A/S
Graham Bells Vej 21-23A
DK-8200 Aarhus N
Tel.
+ 45 8741 3100
Fax + 45 8741 3131
www.guldmann.com
1 .02 Intended use
The Positioning Lock is used to lock a hoist in a single rail system
or to lock a traverse rail system in a certain position. It is possible
to lock a hoist and traverse rail individually or together at the same
time.
The Positioning Lock is mechanical and is controlled via an infra-
red (IR) remote control. The system/hoist is placed in the desired
position and then locked by pressing a button on the IR remote
control. To unlock the system, press the remote control once
again;
see section 2.00
.
1 .03 Conditions for use
The use of the Positioning Lock is subject to the following prere-
quisites:
• The Positioning Lock is only designed for installation with the
GH3/GH3+ ceiling hoist in A, B or C rails.
•
The Positioning Lock may only be used by qualified person
-
nel.
• The hoist may not be used to lift patients when one or more of
the locks are activated.
• It is important that the lock is always disconnected before
lifting patients (the user)
• The Positioning Lock may not be used with the following Guld-
mann products: Combi-Lock, Switch Track, Rail Curves Turn-
table, Drive motor for traverse rail or hoist with drive motor.
• When the positioning lock is activated and the lifting strap is
angled more than 45 degrees from the vertical position, the
hoist can be loaded with maximum 20 kg.
1 .04 Mounting a new Positioning Lock in an existing
hoist/rail system
The Positioning Lock is Class I equipment and must be installed
by the Guldmann Service Team or by a certified installer.
Disconnect the equipment from the power supply by flipping the
main breaker switch.
The Positioning Lock is equipped with battery that require regular
charging. The power supply for charging and the transformer
must be connected by the Guldmann Service Team or a certified
installer.
The Positioning Lock is charged automatically in one of the paral-
lel rails. This ensures that the Positioning Lock will always work
and be ready for use, and that the battery last longer.
The transformer must be connected and switched on before
charging can take place. A green indicator light on the transformer
indicates that it is connected and turned on.
Always use the transformer supplied.
Safety concerning static electricity (ESD)
Service technicians and installers must use an ESD-safety
package consisting of a mat, a ground wire, and a bracelet. The
technician/installer connects the mat to a grounding point, for
instance a radiator or a water pipe. The technician/installer must
then put on the bracelet and connect it to the mat. If it is not pos-
sible to find a grounding point, the mat and the bracelet must be
used as a minimum.
Only then is it allowed to work with the PC Board or components
where it is possible to come into contact with the PC Board.
1 .00 Use of Positioning Lock . . . . . . . . . . . . . . . . . . . . . . . .6
1.01 Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
1.02 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
1.03 Conditions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
1.04 Mounting a new Positioning Lock in an existing . . . . . . . .
hoist/rail system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2 .00 Description of features . . . . . . . . . . . . . . . . . . . . . . . . .7
2.01 IR remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.02 Indikatorlampe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
3 .00 Transport and storage . . . . . . . . . . . . . . . . . . . . . . . . . .8
4 .00 Maintenance and storage . . . . . . . . . . . . . . . . . . . . . . .8
4.01 Cleaning and disinfection . . . . . . . . . . . . . . . . . . . . . . . . .8
4.02 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.03 Daily maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.04 Disposal of Positioning lock, including battery . . . . . . . . .8
5 .00 Service and lifetime . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5.01 Lifetime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5.02 Safety/service inspections . . . . . . . . . . . . . . . . . . . . . . . .8
5.03 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
7 .00 EC-Declaration of conformity . . . . . . . . . . . . . . . . . . . .9
8 .00 Environmental policy statement - V . Guldmann A/S . .9
WARRANTY – U .S .A and Countries outside the EU . . . . . . .10
Users guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
B. WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10