ButtKicker mini Concert Setup
The ButtKicker mini Concert features a multi-directional mounting bracket which allows you
to directly mount it to almost any surface.
1. MOUNT THE BUTTKICKER MINI CONCERT
For most small simulation rigs or cockpits, mounting the ButtKicker mini Concert
to part of the frame/chassis is the best solution because it will transfer the effect
throughout the rig.
For medium to large simulation rigs or cockpits (or certain small ones), mount the
ButtKicker mini Concert directly to the chair or seat in order to feel it the most.
Note: Mounting the ButtKicker mini Concert horizontally will not negatively affect the
product, but perception of the effect is greater when mounted vertically.
2. MOUNTING HARDWARE (NOT INCLUDED)
Use up to 1/4” diameter screws, at least 3/4” long.
For example: the mounting holes are about 1/2” deep, so a 3/4” screw will extend
about 1/4”.
Use wood screws for wood surfaces and sheet screws for metal or other surfaces.
Note: Use a hand screwdriver to tighten the last few
threads of each screw to ensure they don’t strip out.
Screws that aren’t completely tightened may cause a
rattling sound.
Page 4
