manualshive.com logo in svg

Guilin Woodpecker Medical Instrument MT2, Инструкция по эксплуатации, Страница: 3 / 31

Поделиться
Скачать
Guilin Woodpecker Medical Instrument MT2 Скачать руководство пользователя страница 3

1

Forward

Guilin Woodpecker Medical Instrument Co., Ltd is a manufacturer 

specializing in the development and manufacture of dental 

products. Woodpecker owns a sound quality control system and four 

brands, Woodpecker, DTE, DBA and RTA. The main  products 

include Ultrasonic Scaler, Curing light, Apex locator, Ultrasurgery, 

Endo Motor, and Dental Electric Motor, etc.

1 Introduction

The MT2 dental electric motor consists of main unit, motor, motor 

tail line, power adapter and power cord. It is intended for use in 

general dental applications such as: cutting a tooth for cavity 

preparation, crown preparation, crown finishing, inlay, filing, 

polishing, prophylaxis and endodontic treatment.

1.1 Precautions before operation

 Dangers

:

1. To avoid electric shock, please prevent the water from entering 

the control circuit and do not touch the power cord with wet hands.

2. Keep the device away from explosives and flammable objects. 

Do not use this dental electric motor for the patients who are 

anesthetized with nitrous oxide

.

 Warnings:

1. Federal law restricts this device to sale by or on the order of a 

dentist.

2. This dental electric motor may malfunction when it was used 

in an environment where electromagnetic interference occurs. This 

dental electric motor cannot be installed near the device that releases 

the magnetic wave. When using an ultrasonic vibrating device or an 

electrode knife in the vicinity, please switch off the dental electric 

motor.

3. Special precautions need to be taken for EMC, and MT2 needs 

to be installed and put into use according to the EMC environment.

4. Device with electromagnetic emission will affect the normal 

operation of MT2. Please do not run both devices at the same time.

5. Do not use the device in operating rooms that contain a mixture 

of potentially flammable gases.

Содержание MT2
































Отзывы:

Нет отзывов