manualshive.com logo in svg

Guilin Woodpecker Medical Instrument AP-H, Руководство пользователя

Поделиться
Скачать
Guilin Woodpecker Medical Instrument AP-H Скачать руководство пользователя страница 6

6

1.4 Product performance structure and composition

AP-H；This product is composed of handpiece, powder storage 

chamber, tail cord connector and needle.

AP-H Plus:This product is composed of handpiece, nozzle, powder 

storage chamber, tail cord connector and needle.                      

1.5 Scope of application

The product can be used for removal of supragingival and subgingival 

biofilm and pigment and for implant maintenance.

1.6 Contraindications

1.6.1 The hemophilia patient is forbidden to use this equipment. 

1.6.2 The patients with heart pacemaker are forbidden to use this 

equipment.

1.6.3 The doctors with heart pacemaker are forbidden to use this 

equipment.

1.6.4 Heart disease patients, pregnant women and children should be 

cautious to use the equipment.

1.6.5 Patients with respiratory diseases such as asthma and chronic 

bronchitis are forbidden to use this equipment.

1.7 Main technical parameters

1.7.1 Input water pressure: 0.7bar to 2.2bar (70-220kPa)

Содержание AP-H






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды