Customer Helpline
0333 3201989
7
General Safety Warnings for your Laser
Safety Information
Important
- Please read these instructions fully before starting assembly
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
These lasers do not normally present an optical hazard although staring at the beam may
cause flash blindness.
Do not stare directly at the laser beam. A hazard may exist if you deliberately stare into
the beam, please observe all safety rules as follows:
1. The laser shall be used and maintained in accordance with the manufacturer’s
instructions.
2. Never aim the beam at any person or an object other than the work piece.
3. The laser beam shall not be deliberately aimed at another person and shall be
prevented from being directed towards the eye of a person for longer than 0.25
seconds area.
4. Always ensure the laser beam is aimed at a sturdy work piece without reflective
surfaces, e.g. wood or rough-coated surfaces are acceptable. Bright shiny reflective
sheet steel or similar is not suitable for laser applications as the reflective surface
may direct the laser beam back at the operator.
5. Do not change the laser device with a different type. The manufacturer or an
authorized agent must carry out repairs.
6. CAUTION: Use of controls or adjustments other than those specified herein may result
in hazardous radiation exposure.
Additional safety warning for class 2 laser
The laser device fitted to this tool is CLASS 2 with a maximum radiation of 3 mW and 650
nm wavelength.
CLASS 2 LASER RADIATION
,
DO NOT STARE INTO BEAM
