Customer Helpline
0333 3201989
16
2. CHANGING THE SAW BLADE (SEE FIG P1-P4)
Disconnect the saw from the power supply.
Press the blade spindle lock (24) and rotate the blade until it is locked, then loosen and
remove the blade securing bolt, the outer flange with the socket wrench in clockwise
direction.
NOTE:
Blade securing bolt has a left hand thread.
Remove the blade,
(we recommend the use of a stout glove for this).
Clean any saw dust
and debris from the arbor and saw blade securing flanges.
To refit the blade, follow the above procedure in reverse order. If you want to take the inner
flange out for cleaning, refit it as shown in Fig. P4
CAUTION: ALWAYS install the blade with the blade teeth and the arrow printed on the side
of the blade pointing down at the front of the saw. The direction of blade rotation is also
stamped with an arrow on the upper blade guard.
Maintenance
g
g
24
i
j
N1
N2
O1
O2
P1
P2
P3
P4
