Customer Helpline
0333 3201989
9
NOTE:
Before using the tool, read the instruction book carefully.
Intended Use
This tool is intended as a stationary machine for making straight lengthways and
crossways cuts in wood. Horizontal mitre angles of -45° to +45° as well as vertical bevel
angles of 0° to +45° are possible.
ASSEMBLY
WARNING:
To prevent the accidental starting that could cause possible serious
personal injury, ALWAYS assemble all parts to your saw BEFORE connecting it to
the power supply. The saw should NEVER be connected to a power supply when you are
assembling parts, making adjustments, installing or removing blades, or when not in
use.
1. DUST EXTRACTION PORT (SEE FIG A)
To reduce build up of saw dust and maintain top efficiency of cutting, saw dust
collection can be achieved by clipping a dust bag on the dust extraction port.
A dust bag is provided for use on your mitre saw. To install it, simply fit the dust bag over
the extraction port on the upper blade guard.
To empty the dust bag, remove it from the dust exhaust port, open the dust bag by
unzipping the slide fastener.
2. TABLE EXTENSION RAIL (SEE FIG B1)
To install table extension rail, simply insert ends of extensions into the holes in either or
both sides of the base. Secure them in place by tightening the clamp screw on the base.
The table extension rail is used for supporting long work pieces.
Assembly Instructions
A
B1
