Customer Helpline 0333 3201989
18
Assembly Instructions
8� Changing the blade (See Fig B1, C, J)
Move the Blade Guide(11) into a position approximately half way between the Saw Table (15)
and the Tool Housing (25).
Undo the Hood Closure (13) with the screwdriver from outside and open the Side Cover (12).
(See Fig C)
Remove the Web Panel (4).
Turn the Tightening Screw (9) anti-clockwise to release the tension from the blade (26).
(See Fig B1)
Remove the blade (26) from the Blade Pulleys (7, 8) and take out through the slot in the
table (15).
Fit the new blade (26) (not supplied), aligned centrally on the Blade Pulleys (7,8). The teeth
of the blade (26) must point downwards in the direction of the table.
Tension the blade (26).
Close the Side Cover (12).
Mount the Web Panel (4).
9� Changing the rubber tires on the Blade Pulleys (See Fig� C, K)
After a certain time the Rubber Tires (3) on the Blade Pulleys (7/8) will get worn by the
sharp teeth of the blades and must be replaced.
Undo the Hood Closure (13) with the screwdriver from outside and open the Side Cover (12).
(See Fig C)
Remove the blade (26).
Lift the edge of the Tire(3) with the screwdriver and remove from the Blade Pulley (8).
Repeat for the Lower Blade Pulley (7).
Fit the new tire (3)(not supplied). replace the blade (26) and close the Side Cover (12).
C
A3
A4
A5
F3
B1
B2
G
J
K
N1
N2
O
P
Q
D3
D1
D2
L
M
A1
A2
I1
I2
H1
H2
F1
F2
E
18
27
2
1
30
32
33
31
28
34
28
29
29
35
11
36
37
17
b
a
24
21
15
26
24
15
c
d
