Customer Helpline 0333 3201989
15
Assembly Instructions
5�3� Adjusting the Upper Guide Pins (28) (See Fig G)
Undo the Allen Screw (34) .
Move the mount of the Upper Guide Pins (28) so that there is a gap of approx. 1 mm
between the front edge of the Upper Guide Pins (28) and the gullet of the blade in front.
Re-tighten the Allen Screw (34) .
CAUTION! The blade will be rendered useless if the teeth touch the guide pins while the
blade is running.
Undo the Allen Screws (34).
Move the Upper Guide Pins (28) towards the blade so that there is a gap of approx. 0.5 mm
between the Upper Guide Pins (28) and the blade (26). The blade must not jam.
Re-tighten the Allen Screws (34) .
Turn the Upper Blade Pulley (8) several times in a clockwise direction.
Check the setting of the Upper Guide Pins (28) again and re-adjust if necessary.
C
A3
A4
A5
F3
B1
B2
G
J
K
N1
N2
O
P
Q
D3
D1
D2
L
M
A1
A2
I1
I2
H1
H2
F1
F2
E
18
27
2
1
30
32
33
31
28
34
28
29
29
35
11
36
37
17
b
a
24
21
15
26
24
15
c
d
