9
correctly and there will be collisions on the network. If the device detects a
collision of IP address then reboot is performed automatically.
•
after changing IP address device is restarted and new IP address is assigned.
Restart of the device takes about 10 seconds.
•
connect to device using TSensor software and check the measured values. If
Web Sensors
AR005075
and
AR003827
values are not displayed, it’s
necessary to find
probes using button Search probes (Find probes).
•
set the other parameters (alarm limits, SMTP server, etc.). Settings are saved
after click on button Save changes.
Checking functions
The last step is to check measured values on the device website. In the address bar of the
web browser, enter the device IP address. If the default IP address was not changed, then
insert http://192.168.1.213.
Displayed web page lists actual measured values. If the web pages are disabled, you can see
text Access denied. If the measured value exceeds the measurement range or probe is not
correctly installed, then is shown Error message. If the channel is switched off, the web site
displayed n/a instead of the value.