6
Getting started
Here you can find information necessary to put newly purchased equipment to
operation. This procedure is only informative.
What is needed for operation
To install the unit you need to the following equipment. Before installation check if it’s
available.
•
thermometer Web Sensor
AR003826
, Web Sensor
AR005075
or
AR003827
•
power supply adapter 5V/250mA or switch with PoE. Before using the device
is necessary to decide which way of powering will be used.
•
RJ45 LAN connection with appropriate cable
•
free IP address in your network
•
for Web Sensor
AR003827
up to 4 temperatures probes type
DSTR162/C,
DSTGL40/C, DSTG8/C or relative humidity probe DSRH.
Web Sensor
AR005075
supports one probe.
Mounting the device
check if the equipment from previous chapter are available
install the latest version of TSensor software. This software is used to all device
settings. TSensor software can be free downloaded from the manufacturer’s
website. Software can be also supplied on CD. Device configuration can be
made using web interface. For web configuration is not TSensor software
necessary.
contact your network administrator to obtain following information for the
connection to the network:
Chapter
2