3
Installing Transmitter Battery
Note:
Battery is installed when unit is shipped. We suggest that you keep a spare
battery on hand to avoid loss of signal.
1. Remove any static charges from your body by touching a grounded metal object.
2. Remove wireless transmitter from console mounting bracket by slightly bending the
tab back to release the transmitter from the bracket.
3. Remove the two screws on the back of the transmitter with a Philips screwdriver.
With a coin, lightly pry open the transmitter case using the slot in the bottom corner
opposite the key ring hole.
4. Carefully separate the case halves. See illustration for disassembly below.
Slot
Tab (2)
Downloaded from
Downloaded from
Downloaded from
