GUDNORD+ GM-5400-E, Перевод оригинального руководства пользователя

Страница: 6 / 84

6 | GB
2. Device description (Fig. 1 - 2)
1. Tank cover
2. Fuel gauge
3. Disconnector
4. Voltmeter
5. On-/off switch (e-start)
6. Choke
7. Petrol shut-off valve
8. Filter cover
9. Reverse starter
10. Transport handle
11. Support feet
12. 12V connection
13. Oil drain screw
14. Oil filler cap with dipstick
15. 230 V socket (2x)
16. Lead battery - 12V 9Ah/10Hr
17. Earthing screw
18. Transport wheels
19. Exhaust pipe
20. Motor
21. Tank
22. Frame
3. Scope of delivery
A. bolt Ø 7,8 x 62 mm
B. hex nut M8
C. Support feet (2x)
D. Wheel axle Ø 13 x 88.5 mm
E. Transport wheels (2x)
F. Spring split pin (2x)
G. Generators
4. Proper use
The machine may only be used in the intended manner. Any use
beyond this is improper. The user/operator, not the manufacturer, is
responsible for damages or injuries of any type resulting from this.
An element of the intended use is also the observance of the safety
instructions, as well as the assembly instructions and operating
information in the operating manual.
Persons who operate and maintain the machine must be familiar
with it and must be informed about potential dangers.
In addition, the applicable accident prevention regulations must be
strictly observed. Other general occupational health and safety-
related rules and regulations must be observed. The liability of the
manufacturer and resulting damages are excluded in the event of
modifications of the machine.
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and success.
Note:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for damage to the
device or caused by the device arising from:
• Improper handling,
• Failure to comply with the operating instructions
• Repairs carried out by third parties, unauthorised specialists.
• Installing and replacing non-original spare parts
•
Application other than specified
• Failure of the electrical system in the event of the electrical
regulations and VDE provisions 0100, DIN 13 / VDE0113 not
being observed
Please consider:
Read through the complete text in the operating manual before
installing and commissioning the device.
The operating manual is intended to help the user to become
familiar with the machine and take advantage of its application
possibilities in accordance with the recommendations.
The operating manual includes important instructions for safe,
proper and economic operation of the device, for avoiding danger,
for minimising repair costs and downtimes, and for increasing the
reliability and extending the service life of the device.
In addition to the safety instructions in this operating manual, you
must also observe the regulations applicable to the operation of the
device in your country.
Keep the operating manual package with the machine at all times
and store it in a plastic cover to protect it from dirt and moisture.
They must be read and carefully observed by all operating
personnel before starting the work.
The device may only be used by personnel who have been
trained to use it and who have been instructed with respect to the
associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating manual and
the separate regulations of your country, the generally recognised
technical rules relating to the operation of such machines must
also be observed.
We accept no liability for accidents or damage that occur due to a
failure to observe this manual and the safety instructions.