Gude Expert net control 2i2o, Руководство пользователя

Страница: 4 / 14

4
expert net control 2i2o Security Advise
1 Security Advise
The device must be installed only by qualified personnel according to the following installation and operating instructions.
The manufacturer does not accept responsibility in case of improper use of the device and particularly any use of equipment
that may cause personal injury or material damage.
The device contains no user-maintenable parts. All maintenance has to be performed by factorytrained service personnel.
Check if the power cord, the plug and the socket are in proper condition.
The device can be connected only to 230V AC (50 or 60 Hz) sockets.
Always connect the device to properly grounded power sockets.To connect a Power-over-Ethernet device, use only certified
and CE marked hardware.
The device is intended for indoor use only. Do NOT install them in an area where excessive moisture or heat is present.
Because of safety and approval issues it is not allowed to modify the device without our permission.
Please note the safety advises and manuals of connected devices, too.
The device is NOT a toy. It has to be used or stored out or range of children.
Packaging material is NOT a toy. Plastics has to be stored out of range of children. Please recycle the packaging materials.
In case of further questions, about installation, operation or usage of the device, which are not clear after reading the manual,
please do not hesitate to ask our support team.
2 Description
expert net control 2i2o is a handy little device suitable for different kinds of telecontrolling. In- and output ports on the
device allow to monitor and switch contacts through a TCP/IP network. expert net control 2i2o makes it possible to monitor
and switch from any computer in the same LAN and from the Internet.
expert net control 2i2o comprises of two inputs and two outputs.
3 Hardware
3.1
Content of delivery
Included in delivery are:
expert net control 2i2o
Quick installation guide
3.2
Connections
1) Status LED