Screwdriver with ratchet
Technical data
Idle speed
160 rev./min
Capacity
0,272 kW
Max. loosening torque
40 Nm
Working capacity (max. thread size)
M 8
Max. admissible work pressure
6 bar
Noise emission
under DIN 45635 part 20 / 09.90
Acoustic performance level L
WAI max. c
103 dB (A)
Emission level for workplace L
PAI max.
93 dB (A)
Maximal level of measuring area impulse acoustic pressure L
PAI
max, 1m
90 dB (A)
Vibrations (loaded)
under DIN EN 28662 part 1 / 01.93
or E DIN ISO 8662 part 1 / 01.93
14,7 m/sec
2
Square clamp
½ inch
Air consumption
ca 310 l/min
Recommended inner hose cross section
6 mm
Weight
1,24 kg
Air quality needed:
Clean with oil mist:
Compressor capacity:
Compressor charging capacity: 180 l/min.
Corresponds to 1,5 kW.
Adjusting values for work: Working pressure setting on the pressure reducing
valve or filter reducing valve 6 bars.
Illustration
Item
Description
040
Release lever
170
Drive
390
Switching lever for right/left
operation
430
Pneumatic nipple connector
Using the tool for its purpose
The screwdriver with ratchet is an easy-to-use pneumatic tool for craftsmen. It is very suitable for work on cars, motorcycles,
agricultural equipment or assembly belts, in particular at hard to access places. To reach the maximal tightening torque it is not
admissible to use any further manual tightening using the screwdriver. Air escapes through the front part of the machines. The
pneumatic connecter is equipped with a quick coupling device.
Safety provisions
Protect yourself and your surroundings by preventing any accident risks.
-
Screwdriver with ratchet should not be used for any other purpose than it has been designed for.
-
Don’t touch rotating parts.
-
Pneumatic tools should be kept away from children.
-
Work only once you are fully concentrating and feel rested.
-
Use a coupling with a quick closing device for pneumatic connection.
-
Working pressure should be set using the control valve.
-
Do not use oxygen or gaseous fuel as energy supplies.
-
Disconnect the machine from the compressed air supply before starting to repair a possible defect.
-
Use only original spare parts.
-
Don’t let the machine unloaded at full idle speed.
-
Wear necessary protective clothing when working with screwdriver with fastener.
Start up
A sliding nipple which is a part of the delivery (item 403) should be screwed into the reducing nipple. Use a ring spanner or a fork
wrench.
Attention: Thread is to be fastened with a Teflon tape.
14
