
11
Product-specific:
Product compliance
with respective EU
standards
Ban, general in
combination with
another pictograph
No pulling the cable
Warning/Caution
Beware of hazardous
voltage
Unplug before opening
Read operating manual
before use
Wastes to be disposed
of in a professional
manner not to harm the
environment .
Cardboard packaging
to be collected for
recycling
Faulty and/or disposed
of electrical/electronic
appliances to be
collected by authorised
salvage places .
Green Dot –Duales
System Deutschland
AG
Protect from moisture
Fragile
Keep up
9.3
Assigned Use
Electric submersible pump of dirt or clean water of the indicated consistence. Suitable in the areas of use shown below:
•
Emptying storage tanks, rainwater tanks, fountains, ponds, pools and gully holes.
•
Emptying flooded cellars, ships and yachts
•
In building industry
Use/Pumped Fluid
•
Clean, slightly turbid and dirty water (
according the type of the pump
)
Caution:
Special instructions!
•
Prevent bigger stones from being sucked in!
•
To draw dirty water with a maximum proportion of 5% of rough material (thick material, no stones)
•
liquids capable of being drained. Any dirty water may be processed with fibre parts (leaves, paper etc) and dirty liquid (from silos)
by type of the pump.
•
No other fluids are allowed in principle.
•
Not suitable for water biological treatment plants, faeces and cesspits.
These pumps should not be used for flammable liquids, gaseous and explosive substances.
•
Max. temperature of the liquid to be pumped should not be above +35° C in continuous operation of the pump.
The manufacturer shall not be made liable if this manual and regulation of generally binding force are not observed.
9.4
Residual Hazards and Protective Action
9.4.1
Electric Residual Hazards
Hazard
Description
Protective Action
Residual Hazard
Direct electric contact
Electrical shock
Current protection switch FI
Use without FI
Indirect electric contact
Electrical shock via medium
Current protection switch FI
Use without FI
9.4.2
Disposal
Disposal instructions are given by pictographs on the unit or packaging. For meaning of individual symbols refer to chapter “Symbols
on Unit”.
9.5
Operator Requirements
The operator shall read the instruction manual carefully before using the unit.