GB
Before putting the unit in operation, read the manual carefully.
A.V. 2 Reprints, even partial should be approved. Technical changes reserved
.
GB
Any technical questions? Complaints? Do you need any spare parts or the instruction manual?
On your web page
www.guede.com
, in section.
Servicing, you get a fast and non-bureaucratic help. Please, help us to help you. For your
unit to be identified in case of a complaint, we need the series number, year of manufacture and the ordering number. All the data may be
found on the plate. For you to keep them handy at any time, please write them down.
Series number: Ordering number: Year of manufacture:
Tel.:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
Marking: Product Safety Commands
Product complying with respective EU standards
Use protection goggles and ear protectors
Read the operation manual before use
Ratchet screwdriver COMBI PRO
Hardy, chromium plated, polished finish. Extremely high
torque (
110 Nm),
owing to which additional tightening is not
necessary.
Softgrip heated handgrip.
Tool bracket of high
quality. Low vibrations, long-life gearing right/left from the gear
on the head. Air outlet on pneumatic coupling to provide for
nice work. Continuous adjustment of speed.
It includes a connecting plug of a usual nominal width 7,2.
Unit Scope of Supply (Fig. .1)
1. Handle
2. Pneumatic
coupling
3. Control
lever
4. Tool
hold
5. Extension
6. Cross
joint
7. Adapter
3/8“
8. Adapter
½“
9. Socket wrench extension pieces
GB
Declaration of EU Conformity
We, Gude. Birkichstraße 6, 74549 Wolpertshausen, Germany herewith declare,
that the following Appliance complies with the appropriate basic safety and
health requirements of the EC Directive based on its design and type, as
brought into circulation by us.
Of the machine, not agreed upon by us, this declaration will loose its validity.
Ratchet screwdriver COMBI PRO
Ordering number:
75145
Producer’s signature and date: 19.12.08
Dates of the signatory:
Arnold ,executive officer
Respective EU standards:
EC Machinery Directive: 98/392/EEC
Guarantee
Guarantee claims according to the guarantee certificate
attached. Please, understand that we are unable to accept the
guarantee for the following reasons:
• Breach of operation and service instructions.
Necessary cleaning neglect.
• Forcible use, unprofessional handing, misuse or accident.
• Laic interventions or unprofessional attempts to do a repair.
General Safety Directions
Read the operation manual carefully.
Get familiar with the adjustment and correct use of the unit
Assigned Use
The adjustment screwdriver is a pneumatic tool
to do craft works easily .It works very well on
motor vehicles,
motorcycles, agricultural machines or assembly
belts, primarily on hardly accessible places. To
obtain a maximum torque, additional fastening
by hand with ratchet screwdriver is not
permitted. Waste air comes out in the forward
part of the body. Pneumatic coupling is formed
by fast-acting clutch.
Safety Provisions
Protect yourself and those around against accidents with
suitable safety means.
•
Do not touch the rotating parts.
•
The ratchet screwdriver should not be used in contrary
to determination.
•
Protect the pneumatic tools from children.
•
Get down to work well-rested and concentrated.
•
Pneumatic connection via a fast-acting clutch only.
•
Set-up the work pressure on reduction valve.
•
Do not use oxygen or inflammable gases as the source
of energy.
•
Before removing failures, disconnect the unit from the
source of pressure air.
•
Use only the genuine spare parts.
•
Never let the unit idle at full.
•
When working with a ratchet screwdriver, always wear
required protection suits and ear protectors.
13
Содержание 75145
Страница 2: ...1 2 3 4 1 2 3 6 9 5 8 7 2 ...
