GÜDE 58090, Руководство по эксплуатации

Страница: 9 / 56

Thank you for purchasing the Güde masonry chaser MD 1700 and confidence shown by you
in our assortment.
!!! Please read carefully the following Operating Instructions
before putting the appliance into operation !!!
Do you have any technical questions ? Any claim? Do you need any spare parts or operating instructions ?
We will quickly help you and without needless bureaucracy at our home page www.guede.com in the Service part. Please help us be able to
help you. In order to be able to identify your appliance in case of claim, we need the serial No., Order No. and year of production. All this data
can be found on the type label. Please enter the data below for future reference.
Serial No.: Order No.: Year of production:
Tel.: +49 (0) 79 04 / 700-360 Fax: +49 (0) 79 04 / 700-51999 E-Mail: support@ts.guede.com
A.V. 6 Reissues, even if partial, should be authorised.Technical changes reserved. Translation of original operating
instructions
Signs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual
and/or on the unit:
Product Safety:
Product compliance with respective
EU standards
Bans:
General ban (combined with
another pictograph
Do not pull the cable
Do not reach in the rotating parts Do not use the unit in rain
Warning:
Warning/Caution Beware of hazardous voltage
Beware of flying object Beware of laser beam
Use only with suction
Commands:
Read instruction manual before
use
Wear ear protectors. Wear
goggles
Wear breathing mask Use protective gloves
Environment Protection:
Wastes to be disposed of in a
professional manner not to harm
the environment.
Cardboard packaging to be
collected for recycling.
Faulty and/or disposed of
electrical/electronic appliances to
be collected by authorised salvage
places.
Packaging:
Keep away from moisture
The package should be held
upwards
Fragile
Technical Data:
Motor power Connection
Speed rpm Weight
saw blade diameter max. deep cut
Unit
Professional masonry grooving cutter (with protective
insulation) with the cutting line laser indicator. Easy to handle
owing to protracted cutting with the width and depth constant.
Scope of Delivery (Fig. 1)
1. Case
2. Cuter
3. Dust exhaust piece
4. inner hexagon wrench
5. 2 mm spacer
6. 10 mm spacer
7. 15,5 mm spacer
8. Lock nut
9. Retaining flange
10. Spindle socket
11. Grooving chisel
12. Diamond blades 2x
13. Lock nut two-hole wrench
9-GB